Siemens Bently Nevada 3500 Proximitor - Page 26

3500/42 Operation and Maintenance Troubleshooting
201
* Module Removed from Rack
Event Number: 325
Event Classification: Typical Logged Event
Action: No action required.
Monitor Module will stop alarming.
Module Inserted in Rack
Event Number: 326
Event Classification: Typical Logged Event
Action: No action required.
Device Events Lost
Event Number: 355
Event Classification: Typical Logged Event
Action: No action required.
This may be due to the removal of the Rack Interface Module for an
extended period of time.
Module Alarms Lost
Event Number: 356
Event Classification: Typical Logged Event
Action: No action required.
This may be due to the removal of the Rack Interface Module for an
extended period of time.
* Module Entered Calibr. (Module Entered Calibration Mode)
Event Number: 365
Event Classification: Typical Logged Event
Action: No action required.
Monitor Module will stop alarming.
Module Exited Calibr. (Module Exited Calibration Mode)
Event Number: 366
Event Classification: Typical Logged Event
Action: No action required.
Pass Module Self-test
Event Number: 410
Event Classification: Typical Logged Event
Action: No action required.
* Enabled Ch Bypass (Enabled Channel Bypass)
Event Number: 416
Event Classification: Typical logged event
Event Specific: Ch x
Action: No action required.
Alarming has been inhibited by this action.