Information and Communication Products
Communication Devices
V1.2 Page 5 of 34 ICP CD ST
D. Schnoor
8/99
2.3 Priority:
p ........ Mandatory
x ........ Repair
p ........ Optional
p ........ Not Yet Defined
2.4 Repair Documentation
2.4.1 Description of procedure:
2.4.1.1 Diagnosis
Check the output power of the handset with the LSO testprogram.
Especially watch the external antenna power!
2.4.1.2 Repair by component change
Use hot air blower to remove defective connector
Avoid excessive heat!
Watch surrounding components!
Resolder new connector afterwards.
From Power
Amplifier/
To Receiver
To / From
Internal
Antenna
To Next Page
Loading...
