Siemens C55 - Call Barring Details

Setup
75
C55 Tuna english, A31008-H5600-A1-3-7619 (27. March 2003, 13:01)
© Siemens AG 2001, I:\Mobil\L55\C55_Tuna_2\en\en\c55_setup.fm
Your service provider is displayed:
§List§ Display list of preferred
networks.
Create new entry:
• Select empty line, press §Entry§,
then select another entry from the
list of service providers and con-
firm.
Change/delete entry:
• Select entry, press §Change§, then
select a different entry from the
list of service providers and con-
firm it or press §
Clear
§.
Band selection
Select either GSM 900 or GSM 1800.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group
§Menu§KSetupKNetwork
KSelect a function.
If offered by the service provider,
this service enables groups to be
formed. These have access for exam-
ple to internal (company) informa-
tion or special tariffs apply to them.
Check with your service provider for
details.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use (phone code, p. 12).
Select group
You may select or add groups other
than the preferred groups (see be-
low). The service provider supplies
you with code numbers for the
groups.
Outgo. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred grp
If activated, only calls within this
standard user group can be made
(depending on the network configu-
ration).
L
L