Siemens C62 - Pictures and Groups

SIEMENS PTE LTD
C62 Level 2 Service Manual
Copyright © Siemens Pte Ltd. C62 Level 2 manual V1.1
All Rights Reserved
ICM MP CCQ SLI RHQ 30 of 47 Internal Use Only
The following window will appear.
SETTINGS
1. Set baud rate to 115200 bit/s or higher depending on a serial port speed max.
460800 bits/s.
2. Define the correct Root folder, where the software releases have been saved in, by
pressing
button.
The following window will appear.
BROWSE FOR FOLDER
3. Select the correct root folder and press OK (highest level).
4. Define the correct COM port(s) by selecting the “Ports” button.