SIEMENS PTE LTD
C62 Level 2 Service Manual
Copyright © Siemens Pte Ltd. C62 Level 2 manual V1.1
All Rights Reserved
ICM MP CCQ SLI RHQ 39 of 47 Internal Use Only
Printing IMEI label
The module “Print IMEI label” offers the possibility to re-print IMEI labels for mobiles again.
You are able to print 1 label in just one step.
To prevent that misaligned labels are being printed, the setting "test printer = Yes" is activated as
default. After having printed a well-aligned test label you can switch setting to "No" and print the
correct label.
Hint: For correct printing of IMEI labels you must have a Zebra – label printer with special
material that fits for label printing. This printer has to be connected to local LPT1 printer port
(also see Installation of IMPRINT) and MUST feature a printing resolution of 300dpi.
To Next Page
Loading...
