Siemens Cerberus PRO FC721 - System Overview and Station Types; System Overview Properties

System overview
Cyber security disclaimer
3
17 |
118
Building Technologies
A6V10211100_f_en_
--
Fire Safety
2015
-
12
-
15
3 System overview
Cerberus PRO fire control panels FC721 are operated as standalone control
panels. FC721 fire control panels cannot be networked with one another or with
other FS720 fire control panels.
Cerberus PRO fire control panels FC721 support operation of the CNET detector
line as a loop or stub. Automatic fire detectors, manual call points, I/O components,
transponders and other C-NET users are connected to a C-NET detector line.
Figure 2: System overview of the fire control panel FC721
1 Fire control panels FC721
2 C-NET detector line
3
Periphery (e.g. RT alarm transmission installation or acoustic signal
transmitter etc.)
4
PC with the 'Cerberus-Engineering-Tool' FXS7212 software for
commissioning and configuration
Properties
● Integrated operating unit
● Integrated line card for C-NET detector line
● Integrated power supply 70 W
● Optional power supply 70 W or 150 W in separate empty housing
C-Net
1
4
Synoptic
2
3
C
Cerberus
TM