Mounting and assembling a station
5
22 | 118
5 Mounting
5.1 Mounting and assembling a station
Before mounting and installation, check all the fire detection installation
components visually for damage caused by improper transport.
Figure 3: Unpacking and checking
● Components with clear signs of damage must not be used in the station or
operated as fire detection installation components.
● National and local standards and requirements must be observed when
assembling the station and its components.
● The following mounting instructions refer to the specifications of the EN 54
standard and the manufacturer's recommendations.
● The site chosen to assemble the station and associated components must
match the planning documents for the fire detection installation.
TM
To Next Page
Loading...
