Siemens Cerberus PRO FC721 - Assembling FC721 with Additional Housing; Additional Housing Assembly

Mounting
Mounting instructions
5
26 | 118
Building Technologies
A6V10211100_f_en_
--
Fire Safety
2015
-
12
-
15
Assembling the FC721 and additional housing (option)
The FC721 is supplied inside the Eco housing.
An additional empty housing (Standard) can be assembled and connected for a
larger battery capacity. This has space for an additional 150 W power supply and
larger batteries. The additional housing is mounted directly below the FC721 and is
screwed onto it.
The empty housing (Standard) consists of the following components:
● Rear panel
● Operator unit (empty)
● Cover cap
Figure 5: Assembling the FC721 and additional housing (option)
1 FC721 with the 3 mounting points
2 Cable entries
3
Additional empty housing (Standard)(empty) for optional power supply
(150 W)
4 Mounting points for wall mounting
5 Holes for housing assembly
6 Break-outs for cable entry
7 Break-out holes for cable entry
X8 X7 X6 X11
X3X4 00
X1
X3
X8
4
5
5
3
1
2
6
7