5
28 | 118
5.2.2 Mounting and wiring the operating unit
From IP5, the PMI & mainboard FCM2027 is used. You will find detailed
information in document A6V10210368.
Figure 6: View of an FC721 with open operating unit
1 Connection (X3) for the ribbon cable on the periphery board
2 Hinge
3 Cable routing to the optional components
4 Cable ties for fixing the cables
5 Operating unit
6 Holes for securing the operating unit
7 Connection (X3) for the ribbon cable on the PMI & mainboard
8 Ribbon cable from the periphery board to the PMI & mainboard
9 Plastic clip for securing the ribbon cable
2
1
3
4
To Next Page
Loading...
