Siemens Cerberus PRO FC721 - Shield Connection Blocks and Cable Kit; Installing Shield Connection Terminal Blocks

Mounting
Options
5
38 | 118
Building Technologies
A6V10211100_f_en_
--
Fire Safety
2015
-
12
-
15
5.5.3 Install shield connection terminal blocks
Figure 12: Mounting of the shield connection terminal blocks
1 Shield connection terminal block 3 Philips screws M 3/6
2 Camp bar
Mounting steps
1. Secure the clamp bar (2) above the rectangular cable breakout opening on the
right with two screws (3)
2. Hang the shield connection terminal blocks (1) onto the clamp bar (2) and
fasten by tightening the knurled screws.
1
2