Siemens Climatix ECO - Accessories; Product Documentation; Notes; Security

6
Siemens
A6V11681604_enUS_c
Smart Infrastructure
03/27/2023
Accessories
A WLAN stick needs to be connected to the product via the USB host interface during
commissioning with the Climatix Mobile application.
Type of unit
Product no.
Datasheet*
WLAN stick
POL903.00/100
S55803-Y130-A100
CC1N7219en
NOTE: Accessories are not included with the unit and should be ordered separately.
* The document can be downloaded from http://siemens.com/bt/download by specifying the
product number as shown in the above table. Relevant data such as SSID, password for the
terminal unit and web interface for configuration can be found in the document.
Product Documentation
Title
Document ID
Mounting instructions
A6V11997548
Application manual
A6V12031524
CE declaration
A5W00148475A
RCM conformity
A5W00148474A
Product environmental declaration
A5W00068298A
All documentation can be downloaded at Siemens US Download Center.
Notes
Security
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
Mounting
The Economizer Controller can be mounted to sheet metal ductwork. When mounting, note
the following:
● Mount the controller in a position that allows clearance for wiring, servicing, and removal.
See Mounting Instructions for required mounting clearances.
● (For POL224.05) four spacers (M3.5 x L (L ≥10 mm) ) and four M3.5 screws are
required. Metal spacers are recommended.
● (For POL224.00) two No. 6 3/4” self-tapping screws are required.
● Siemens does not provide screws or spacers with the product. They must be obtained
separately.