en Familiarising yourself with your appliance
10
Symbol Name Meaning
Drip tray The symbol indicates the status of
the drip tray.
The symbol lights up and the arrow
flashes:
¡ The drip tray is in the tank recess.
¡ The drip tray is full.
¡ Empty the drip tray.
The symbol flashes and the arrow
does not flash:
¡ The drip tray is not in the tank re-
cess.
¡ Insert the drip tray into the tank re-
cess.
The symbol lights up and the arrow
does not light up:
¡ The drip tray is in the tank recess.
¡ No further action necessary.
Water tank The symbol indicates the status of
the water tank.
The symbol lights up and the arrow
flashes:
¡ The water tank is in the tank re-
cess.
¡ The water tank is empty.
¡ Fill the water tank.
The symbol flashes and the arrow
does not flash:
¡ The water tank is not in the tank
recess.
¡ Insert the water tank into the tank
recess.
The symbol lights up and the arrow
does not light up:
¡ The water tank is in the tank re-
cess.
¡ No further action necessary.
Descale If this symbol lights up, the appliance
must be descaled.
Temperature display
The temperature display shows the heating progress.
The blue thermometer to the right of the time indicates
that the appliance is heating up. If a type of heating is
in use, the thermometer turns blue in four stages as the
cooking compartment heats up. If you are using the
grill or steam mode, the entire thermometer lights up
blue immediately. The thermometer does not light up
when the microwave function is in use. When you are
preheating the appliance, the optimal time to place
your food in the cooking compartment is as soon as
the entire thermometer has turned blue.
Due to thermal inertia, the temperature that is displayed
may differ slightly from the actual temperature inside
the cooking compartment.
Night mode
To save energy, the control panel brightness is auto-
matically reduced to a lower level between 10 p.m. and
5.59 a.m.
Rotary selector
You can use the rotary selector to change the adjust-
ment values shown on the display.
For most selection lists, e.g. programmes, the first
point begins again following the last point. For some
selection lists, e.g. cooking time, rotate the rotary se-
lector back again once the minimum or maximum
value has been reached.
To Next Page
Loading...
Need help?
General
