ImportAppliances.com
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Getting to know your appliance en
9
*Getting to know your
appliance
Get t i ng to know your appl i ance
In this section, we explain the display and controls.
You will also find out about the various functions of your
appliance.
Note: Depending on the appliance model, individual
details and colours may differ.
Control panel
Use the function and rotary selector, as well as the
touch fields, to set the various functions for your
appliance via the control unit. The current settings are
shown in the display.
The overview shows the control panel when the
appliance is switched on with a selected operating
mode.
Notes
■ On some appliances, the function or rotary selector
can be retracted. To pop the function or rotary
selector in or out, push it in in the "Off" position.
■ If the function selector is in the "Off" position (energy-
saving mode) and a function is selected, it will take a
few seconds before the function becomes available
(e.g. the microwave).
Function selector
Use the function selector to set the operating modes
and other functions.
To make sure you always use the right operating mode
to cook your food, we have explained the differences
and applications below.
--------
( Function selector
Use the function selector to set the type of heating
or other functions.
You can turn the function selector clockwise or
anti-clockwise from the "Off" position.
0 Touch fields
There are sensors behind the touch fields. Simply
touch a symbol to select the function.
8 Display
The display shows symbols for active functions
and the time-setting options.
@ Rotary selector
Use the rotary selector to set the temperature for
the heating type or select the setting for other
functions.
You can turn the rotary selector clockwise and
anti-clockwise.
Position Use
" "Off" position In this position, the appliance is
switched off and is in energy-saving
mode.
ß Microwave Select microwave mode.
P Steam Hot steam is fed into the cooking
compartment.
( Full-surface grill The whole area below the grill ele-
ment becomes hot.
* Centre-area grill The centre part of the grill element
becomes hot.
% Descaling Used to descale the evaporator and
keep it operational.
ù Rinse This function rinses the pipes in the
steam unit with water.
X Programmes This gives you access to prepro-
grammed settings for many dishes.
c Interior lighting Switches the interior lighting on. The
appliance is not heating.
To Next Page
Loading...
