Getting to know your appliance en
9
*Getting to know your
appliance
Get t i ng to know your appl i anc e
In this section, we explain the display and controls. You
will also find out about the various functions of your
appliance.
Note: Depending on the appliance model, individual
details and colours may differ.
Control panel
Use the function and rotary selector, as well as the
touch fields, to set the various functions for your
appliance via the control unit. The current settings are
shown in the display.
The overview shows the control panel when the
appliance is switched on with a selected operating
mode.
Notes
■ On some appliances, the function or rotary selector
can be retracted. To pop the function or rotary
selector in or out, push it in in the "Off" position.
■ If the function selector is in the "Off" position (energy-
saving mode) and a function is selected, it will take a
few seconds before the function becomes available
(e.g. the microwave).
Function selector
Use the function selector to set the operating modes
and other functions.
To make sure you always use the right operating mode
to cook your food, we have explained the differences
and applications below.
--------
( Function selector
Use the function selector to set the type of heating
or other functions.
You can turn the function selector clockwise or
anti-clockwise from the "Off" position.
0 Touch fields
There are sensors behind the touch fields. Simply
touch a symbol to select the function.
8 Display
The display shows symbols for active functions
and the time-setting options.
@ Rotary selector
Use the rotary selector to set the temperature for
the heating type or select the setting for other
functions.
You can turn the rotary selector clockwise and
anti-clockwise.
Position Use
" "Off" position In this position, the appliance is
switched off and is in energy-saving
mode.
ß Microwave Select microwave mode.
P Steam Hot steam is fed into the cooking
compartment.
3 Convection The fan distributes the heat from the
ring heating element in the back
panel evenly around the cooking com-
partment.
( Grill The whole area below the grill ele-
ments becomes hot.
4 Hot air grill The fan circulates the hot air from the
grill elements around the food.
% Descaling Used to descale the evaporator and
keep it operational.
ù Rinse This function rinses the pipes in the
steam unit with water.
X Programmes This gives you access to prepro-
grammed settings for many dishes.
To Next Page
Loading...
