en Installation instructions
52
21.10 Installing the appliance
1.
Use a spirit level to adjust the appliance so that it is
perfectly level.
2.
Push the appliance in fully.
3.
Align the appliance horizontally and centrally.
4.
Screw the appliance tightly onto the unit.
5.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
Note:Do not close the gap between the worktop and
the appliance using additional battens.
Do not attach any thermal insulation strips to the side
panels of the surround unit.
21.11 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.
To Next Page
Loading...
