Installing
3.3 Installing Control Unit
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
22 Getting Started, 04/2014, A5E32885834B AB
The factory setting of the terminals depends on whether the Control Unit has a PROFIBUS /
PROFINET interface.
Factory setting of the terminals for Control Units without
PROFIBUS interface
Factory setting of the terminals for Control Units with
PROFIBUS interface
Fieldbus interface is not active.
Fieldbus interface depends on DI 3.
Changing the function of terminals
The function of every color-coded terminal can be set.
In order that you do not have to successively change terminal for terminal, several terminals
can be jointly set using default settings.
To Next Page
Loading...
