Siemens DESIGO PXM10 - 6 Scheduler; Day Profile

23/34
Siemens Building Technologies PXM10 operator unit CM110397en
Siemens Building Automation 31.08.2004
6 Scheduler
The Scheduler consists of a "Day profile" option (for 7-day
programs) and a "Special period" option for exceptions.
• In the "Day profile" you can define switching operations to
be repeated week after week.
• In the "Special period" menu, you define individual days
which deviate from those defined in the day profile.
The names and locations of these time schedules are
defined on a plant-specific basis. The following illustrations
are examples only.
6.1 Day profile
In the Day profile you can define separate switching periods
for each day of the week, which are then repeated week after
week..
Figure 6-1
Note
All manuals and user guides at all-guides.com