Siemens DESIGO PXM20 - Domain ID (PXM20 Only); Network Scope

25/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies Settings 17 Dec 2009
3.2.16 Domain ID (PXM20 only)
Set the Domain ID for the PXM20 here.
Figure 3-10 Domain ID
Important This setting should be modified only by fully trained staff.
3.2.17 Network scope
Note
This setting is not visible to all users.
BACnet networks are divided by BACnet routers, e.g. PXG80-N.
Communication within a BACnet network is local, while
communication across all BACnet networks (connected by BACnet
routers) is global.
Use this option to specify whether the BACnet communication is to
be local or global, i.e. whether PXM20(-E) should be able to
communicate only with BACnet devices connected to the same
network, or also with BACnet devices connected to another BACnet
network.
Important This setting should be modified only by fully trained staff.