6/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies About this manual 17 Dec 2009
1.3 Printing conventions
1.3.1 Text
Bold text is used for text exactly as it appears in the display, e.g.
START, ACKNOWLEDGE, Settings etc.
1.3.2 Keys
Keys are shown as follows:
Key names that appear on the key itself are shown in angular
brackets < > This convention is used for the <
? > key (Info), and
the <
– > and < + > keys. Example: Press the <?> key.
The OK key and ESC key are referred to without brackets; their
name is marked on the unit housing. Example: Press the ESC key
or: Acknowledge with OK.
The "direct access" keys are referred to as such. Their function is
described neither on the keys themselves nor on the housing.
Example: Use the direct access key to go to the next value.
The same applies to the Page Up and Page Down keys.
Example: Go to the next dialog box using the Page Down key.
1.3.3 Notes
STOP
Important The symbol shown here acts as a warning in cases where an action
may result in permanent loss of data.
Important Particular attention should be paid to text marked with this symbol.
Note
A note qualifies an immediately preceding statement or statements.
To Next Page
Loading...
