Siemens DESIGO RXC - Workflow with RXT10 and XIF-Import

10 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Workflow with RXT10 and SBT generic plug-in 23 Sep 2011
Workflow with RXT10 and SBT generic plug-in
Basis: PC with DESIGO infrastructure
RXT10 version 4 or higher
Step: Download:
EasySens_Empfaenger_Receiver_SRC04FTT_SRC65FTT_160108_156.zip
Extract and save LON application:
srcn_9_1_01 (.apb; .nxe; .xfb; .xif) / optional: srcn_12_1_01
Source: Download from the DESIGO RX intranet:https://intranet10.sbt.siemens.com/
business/building_comfort/systems/desigo/ra/_des_ra_qax/_des_ra_qax95.htm
Set up the gateway with the RXT10 tool by following the standard procedure for
integration of third-party devices (for details, refer to User Manual RXT10,
CM110669).
Step Procedure
1
Device > Add
Select tab Device Type.
From selection menu Device Type, select PLG: Plug In Support.
On the "Device" list, highlight PlugInDevice.
2
Select tab
Overview to enter the location. Confirm by clicking OK.
3
RXT: Select <no networkinterface>
Network > Connect (Attached offnet)
Infrastructure
Engineering with
RXT10 and XIF-Import