Siemens ET 200pro - 16 Pneumatic Interface Modules; Pneumatic Interface Module 16 DO DC 24 V CPV10 (6 ES7148-4 EA00-0 AA0)

ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
451
Pneumatic interface modules
16
16.1
Pneumatic interface module 16 DO DC 24V CPV10
(6ES7148-4EA00-0AA0)
Order number
6ES7148-4EA00-0AA0
Properties
● Pneumatic interface module with 16 outputs
● Output current matched to FESTO CPV10 valve terminal
● Rated load voltage 24 V DC
● Suitable for FESTO valve terminal CPV10 with up to 16 valves (OUT0 to OUT15) and
relays
● "Missing load voltage" diagnostics for each module
● Safe restarting of valves after a "missing load voltage"
Note
Valves
The valves can be disconnected for safety reasons.
More detailed information is available in the Appendix in the chapter
Fail-safe shutdown
of the ET
200pro Standard edition modules (Page 524).