Siemens ET 200SP HA - Wiring; 3.1 Pin assignment

Description
The following accessories are available:
• BusAdapter
Type Article number Function
BA 2×RJ45 6DL1193-6AR00-0AA0 Adapter for Ethernet cable with RJ45 connector
BA 2×FC 6DL1193-6AF00-0AA0 Adapter for direct connection of the Fast Connect bus
cable
BA 2xLC 6DL1193-6AG00-0AA0 Adapter for glass 󹪝ber optic cable with IE FC LC Plug
BA LC/RJ45 6DL1 193-6AG20-0AA0 Adapter for glass 󹪝ber optic cable with IE FC LC Plug and
Ethernet cable with RJ45 connector
BA LC/FC 6DL1 193-6AG40-0AA0 Adapter for glass 󹪝ber optic cable with IE FC LC Plug and
direct connection of the Fast Connect bus cable
BA 2xRJ45VD HA 6GK5 991-2VA00-8AA2 Adapter for connection of an IO device to the PROFI‐
NET IO system using a 2-wire system with copper wires
• Carrier modules
– Carrier for one IM 155‑6 PN HA
– Carrier for two IM 155‑6 PN HA for redundant con󹪝guration
• Server module
• Power bus cover
• Labeling strips
• Reference identi󹪝cation label
3.3 Fail-safe I/O modules in the I/O device
3.3.1 Response times for the fail-safe modules
De󹪝nition
You need to consider the following maximum response time of the interface module for the
calculation of the response times of the fail-safe modules:
Maximum response time = con󹪝gured update time + 800 μs (but at least 1.8 ms)
Product overview
3.3 Fail-safe I/O modules in the I/O device
IM 155-6 PN HA
Equipment Manual, 09/2021, A5E39262148-AE 11