Siemens ET 200SP HA - Interrupts

7.6 Interrupts
De󹪝nition
A diagnostics interrupt is an alarm that reports activated events of a device status to the system
operator with the appropriate operating authorization (maintenance and service).
Description
The interface module supports diagnostics interrupts:
The IM 155-6 PN HA generates a diagnostic interrupt for the following events:
• Faulty 24 V DC power supply
• Module parameter errors or incorrect carrier present in real slot
• Failure of redundancy partner
• Impermissible bus adapter on interface module
• Incorrect bus adapter in redundancy partner
• Permissible backplane bus size exceeded
• No server module
Diagnostics of I/O modules are forwarded by the IM 155-6 PN HA and depend on the respective
I/O module.
The IM 155-6 PN HA generates a maintenance message for the following events:
• Di󹪜erent hardware/󹪝rmware in the redundancy partners
• IO redundancy warning
• Redundancy parameter assignment inconsistent
• Retentive memory in carrier module defective
Displays and interrupts
7.6 Interrupts
IM 155-6 PN HA
34 Equipment Manual, 09/2021, A5E39262148-AE