Siemens et 200sp - Page 131

Configuring/address space
4.9 Explanation of parameters
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
130 Manual, 05/2019, A5E35061186-AB
Operating mode
Meaning
Mode-dependent parameters
Pulse train The channel outputs a number of pulses. You specify
the number of pulses in the control interface.
• High-speed output (0.1 A)
• Function DI
• Input delay
• Output format
• Period duration
• Actual period duration
• On delay
• Duty cycle
On/Off delay The channel outputs pulses with specified switching
delay with respect to DI0. You specify the On delay in
the control interface.
• High-speed output (0.1 A)
• Input delay
• Off delay
Frequency output The channel outputs a signal with a fixed duty cycle of
50%. You specify the frequency in the control interface.
• High-speed output (0.1 A)
• Function DI
• Input delay
• Output format
• On delay
PWM with DC motor The channel outputs a pulse width modulated signal for
controlling a DC motor in both directions of rotation.
You specify the duty cycle in the control interface.
• Function DI
1
• Input delay
• Output format
• Period duration
• Actual period duration
• On delay
1
1
Parameters cannot be assigned in isochronous mode