Siemens euroset 3020 - Call Identification; Receiving a Call; Indication of Received Calls; Consultation of Received Calls

11
:
Press the desired memory number
(
to , and )
The message "STORED” will appear
on the display
Note:
• The number must be stored with the
handset on hook.
• A phone number won’t be stored in the
memories if it is longer than 16 digits.
• You can erase a stored phone number in
a specific memory by restoring another
phone number in it.
• The keys
and are stored in the
memories (
to , and ),
independently of the used dialing mode,
but they only have effect on the TONE
mode.
• It is possible to store an external
telephone number in one of the
memories, when the telephone is
connected on a PBX system. Just insert,
before the number that will be stored, the
access code for external line followed by
a pause (press the PAUSE key
).
Call Identification
If the call identification service has been
contracted together with your local
operator, the telephone number and the
name of the call originator can be seen on
the display, before taking the handset off
hook. The information will be shown on the
display after the second telephone ring. If
the telephone is answered before this,
the identification information will not be
shown on the display.
Receiving a call
On receiving a call, the display will show
the number and the name of the caller. In
the case of Long Distance Calls the
received number will be showed with the
area code. Now for calls with the same
area code that are programmed in the
telephone, the caller's number will be
shown on the display without the area
code.
If the caller number is not sent, it will not be
shown on the display and will not be stored
in the list of received calls.
On answering the call, the number, the
name and current time/date will be shown.
The time and the date will be stored for
future consultation.
The information received will be shown
during the conversation, disappearing when
the handset is replaced on hook.
Indication of received calls
With the handset on hook, the display will
show the following information: number of
received calls, number of new calls, current
time and date.
Consultation of received calls
To consult the received calls, press one of
the ARROW keys
or , with the handset
on or off hook. During the consultation, the
display will show the information described
below, in accordance with the figure of the
display:
1) Order number of call on the list, where 1
is the most recent call
2) Time of the call beginning
3) Date of the call beginning
41 2 3
5 6