Siemens euroset 3020 - Programming the Alarm; Deactivating the Alarm

16
In case of collision between the entering
call and the alarm, the entering call has
priority, it means:
• The ring will be in the rhythm of the call;
• If there is call identification, the alarm
clock message on the display will not be
shown.
Programming the alarm
Press the MENU key
Select the ALARM option by using the
DIAL/SELECT key
Select the Y option by using the
ARROW key
Press the DIAL/SELECT key
Select the ENABLED option by using
the ARROW key
Press the DIAL/SELECT key
:
Enter the desired time for the alarm
with four digits in 24h format
(example: 13:57h - enter 1357)
Press the MENU key
Deactivating the alarm
Press the MENU key
Select the ALARM option by using the
DIAL/SELECT key
Select the Y option by using the
ARROW key
Press the DIAL/SELECT key
Select the DISABLED option by using
the ARROW key
Press the MENU key