5
Configuration
Once connected to the line, the telephone
will be ready to make and receive calls. In
this initial situation, the display will show
information shown in the figure below,
where NEW 00 is the number of non
answered calls:
In the next items, it will be shown the
description of the possible configurations
made by the telephone menu. To make the
adjustments, the handset must be on hook.
Display bright
To adjust the display bright, proceed in the
following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the BRIGHT option by using
the DIAL/SELECT key
Select the desired option
using the ARROW key
Press the MENU key
Backlight
To activate or deactivate the backlight of
the display, proceed in the following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the BACKLIGHT option by
using the DIAL/SELECT key
Select the desired option (Y or N) by
using the ARROW key, to activate or
deactivate the backlight
Press the MENU key
Setting the time
To adjust the time of the telephone it is
necessary to access two options of the
CONFIGURATION menu: time adjustment
and visualization format (24h or AM/PM). If
any of these items are already correct, you
can go to the next step by pressing the
DIAL/SELECT key
. See the following
adjustment procedure:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the ENTER TIME option by
using the DIAL/SELECT key
:
Enter the time with four digits in the
24h format (example: 13:57h - enter
1357 digits)
Press the DIAL/SELECT key, until
appears the FORMAT option
Select the desired option (24 HS or
AM PM) by using the ARROW key
Press the MENU key
To Next Page
Loading...
