Siemens euroset 3020 - Setting the Date; Setting the Ringer Volume; Setting the Melody; Setting the Dialing Mode (Tone;Pulse)

6
Setting the date
To adjust the date of the telephone it is
necessary to access more than one option
of the CONFIGURATION menu, to enter
day, month and year. If any of these items
are already correct, you can go to the next
step, without enter anything, by pressing
the DIAL/SELECT key
. See the
following date adjustment procedure:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the ENTER MONTH option by
using the DIAL/SELECT key
:
Enter the number of the month with
two digits (example: 06 for June)
Press the DIAL/SELECT key, passing
to the option ENTER DAY
:
Enter the number of the day with two
digits (example: 08)
Press the DIAL/SELECT key, passing
to the option ENTER YEAR
:
Enter the number of the year with two
digits (example: 03 for 2003)
Press the MENU key
Setting the ringer volume
This telephone offers three different ringer
volumes. To adjust, proceed in the
following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the RINGER VOLUME option
by using the DIAL/SELECT key
Select the desired option (1-low, 2-
medium, 3-hi
g
h
)
b
y
usin
g
the ARROW
key
Press the MENU key
Setting the melody
This telephone offers three different
melodies. To adjust, proceed in the
following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the MELODY option by using
the DIAL/SELECT key
Select the desired option
(
1, 2 or 3
)
b
y
using the ARROW key
Press the MENU key
Setting the dialing mode (tone/pulse)
Your telephone must be programmed for
TONE dialing or PULSE dialing, according
to the telephone line it is connected to. The
default factory setting is the TONE dialing
mode with the flash time of 250 ms
(DTMF).
Checking the dialing mode
:
Press any numeric key. If you can still hear
a dialing tone, change to the other dialing
mode.
Changing the dialing mode
:
To adjust the dialing mode to PULSE or
TONE, proceed in the following way: