Siemens FC300 - Page 365

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.4.6.3 Sensor alarms (1) Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
● 32 SIL
parameters
not validated
● 33 SIL
parameters
not validated
● 34 SIL
parameters
not validated
● 35 SIL
parameters
not validated
● 36 Sensor
supply voltage
out of range
● 37 Sensor
supply voltage
out of range
● 38
Temperature
measurement
fault
● 39
Temperature
measurement
fault
● 40
Temperature
measurement
fault
● 41
Temperature
User
Default settings
B.5 Inputs and outputs
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 365