Siemens FC300 - Page 368

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.4.6.4 Sensor alarms (2) Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
● 64 Frame
temp. below
limit
● 65 Frame
temp. above
limit
● 66 “Standard
deviation”
above limit
● 67 “Zero point
offset” above
limit
● 68 Zero point
adjustment
failed
● 69 “Empty
tube limit”
exceeded
● 70 Too little
fluid in tube
● 71 Parameter
storage
malfunction
● 72 Internal
error in sensor
● 73 Internal
error in sensor
● 74 Internal
error in sensor
● 75 Internal
error in sensor
● 76 Internal
error in sensor
● 77 Internal
error in sensor
● 87 The sensor
is stabilizing
User
Default settings
B.5 Inputs and outputs
MASS 2100 & FC300 (FCT030)
368 Operating Instructions, 06/2017, A5E39789040-AA