Siemens FC300 - Page 369

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.4.6.5 Process alarms (1) Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
● 96 Mass flow
above alarm
limit
● 97 Mass flow
above
warning limit
● 98 Mass flow
below warning
limit
● 99 Mass flow
below alarm
limit
● 100 Volume
flow above
alarm limit
● 101 Volume
flow above
warning limit
● 102 Volume
flow below
warning limit
● 103 Volume
flow below
alarm limit
● 104 Density
flow above
alarm limit
● 105 Density
flow above
warning limit
● 106 Density
flow below
warning limit
● 107 Density
flow below
alarm limit
● 108 Media
temperature
flow above
alarm limit
● 109 Media
temperature
User
Default settings
B.5 Inputs and outputs
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 369