Siemens FC300 - Page 373

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.4.6.9 Totalizers alarms Select one or more Individual
alarmss. The output is active
when one of the Individual
alarmss occurs.
● 136 Totalizer
1 above
alarm limit
● 137 Totalizer
1 above
warning limit
● 138 Totalizer
1 below
warning limit
● 139 Totalizer
1 below
alarm limit
● 140 Totalizer
2 above
alarm limit
● 141 Totalizer
2 above
warning limit
● 142 Totalizer
2 below
warning limit
● 143 Totalizer
2 below
alarm limit
● 144 Totalizer
3 above
alarm limit
● 145 Totalizer
3 above
warning limit
● 146 Totalizer
3 below
warning limit
● 147 Totalizer
3 below
alarm limit
User
Default settings
B.5 Inputs and outputs
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 373