Mounting and installation of the compact control panels
5
172 | 354
5.19.2.4 Connection terminals of line card (collective) in card cage
The ↑ line card (collective) FCL2002-A1 determines the PIN assignment of the four
connection terminals in the card cage.
External connections on the card cage using the example of module bus card 1
with the associated connection terminals X11 and X12:
● The external connections of module bus card 2 are on connection terminals
X21 and X22
● The external connections of module bus card 3 are on connection terminals
X31 and X32
● The external connections of module bus card 4 are on connection terminals
X41 and X42
● The external connections of module bus card 5 are on connection terminals
X51 and X52
Depending on the card cage, not all slots may be available for module bus cards
and connection terminals. However, the numbering and assignment of the
connection terminals are identical on all card cages.
Connector Pin Signal Connection ↑ Stub
X11 1 IO_1 Stub_1+ Stub 1
2 IO_2 Stub _1-
3 IO_3 Stub _2+ Stub 2
4 IO_4 Stub _2-
X12 1 IO_5 Stub _3+ Stub 3
2 IO_6 Stub _3-
3 IO_7 Stub _4+ Stub 4
4 IO_8 Stub _4-
X11 5 IO_9 Stub _5+ Stub 5
6 IO_10 Stub _5-
7 IO_11 Stub _6+ Stub 6
8 IO_12 Stub _6-
X12 5 IO_13 Stub _7+ Stub 7
6 IO_14 Stub _7-
7 IO_15 Stub _8+ Stub 8
8 IO_16 Stub _8-
Admissible cable cross-section: 0.2…1.5 mm²
43
658
7
2143
8
7
To Next Page
Loading...
