Siemens G130 - r0171 Drive objects function module 1; DO fct_mod 1; p0172[0...n] Drive objects function module 2; DO fct_mod 2

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
102 List Manual (LH2), 07/2016, A5E03263479A
Dependency: Active messages can prevent or influence activating a function module.
Refer to: p0108, r0108, p0172, r0172, p0173, r0173
Refer to: A07089, F13010
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Description: Displays the activated function module for the particular drive object.
Dependency: Refer to: p0108, r0108, p0172, r0172, p0173, r0173
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Description: The function module of an existing drive object is entered into each index (see p0101, p0107).
The following bits are available in p0172 for the Control Unit (Index 0):
- still none
For all other drive objects (Index > 0), the significance of the bits should be taken from the display parameters r0172
of the drive object.
22 Bit 22 ON OFF -
23 Bit 23 ON OFF -
24 Bit 24 ON OFF -
25 Bit 25 ON OFF -
26 Bit 26 ON OFF -
27 Bit 27 ON OFF -
28 Bit 28 ON OFF -
29 Bit 29 ON OFF -
30 Bit 30 ON OFF -
31 Bit 31 ON OFF -
r0171 Drive objects function module 1 / DO fct_mod 1
VECTOR_G, B_INF,
TM31, TM120, TM150,
TB30, ENC
Can be changed: - Calculated: - Access level: 2
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
p0172[0...n] Drive objects function module 2 / DO fct_mod 2
CU_G130_PN,
CU_G150_PN,
CU_G130_DP,
CU_G150_DP
Can be changed: C1(2) Calculated: - Access level: 2
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0000 0000 0000 0000 0000
0000 0000 0000 bin
Bit field: Bit Signal name 1 signal 0 signal FP
00 Bit 0 ON OFF -
01 Bit 1 ON OFF -
02 Bit 2 ON OFF -
03 Bit 3 ON OFF -
04 Bit 4 ON OFF -
05 Bit 5 ON OFF -
06 Bit 6 ON OFF -
07 Bit 7 ON OFF -
08 Bit 8 ON OFF -
09 Bit 9 ON OFF -
10 Bit 10 ON OFF -
11 Bit 11 ON OFF -
12 Bit 12 ON OFF -
13 Bit 13 ON OFF -
14 Bit 14 ON OFF -
15 Bit 15 ON OFF -
16 Bit 16 ON OFF -
17 Bit 17 ON OFF -
18 Bit 18 ON OFF -