Siemens G130 - Fig. 3-105 2900 - Basic Functions control interface (p9601.2;3 = 0 & p9601.6 = 1)

SINAMICS G130/G150 List Manual (LH2), 07/2016, A5E03263479A
1217
3 Function diagrams
3.12 Safety Integrated TM54F
Fig. 3-105 2900 – Basic Functions control interface (p9601.2/3 = 0 & p9601.6 = 1)
- 2900 -
Function diagram
87654321
DO: TM54F_MA, TM54F_SL
SINAMICS
06.07.15 V04.08.00
SI TM54F - Basic Functions control interface (p9601.2/3 = 0 & p9601.6 = 1)
fp_2900_51_eng.vsd
p10000 (12.00 ms)
[2893.8]
[2893.8]
[2894.8]
[2894.8]
[2894.8]
[2894.8]
[2894.8]
Statically inactive
[2893.8]
[2893.8]
[2893.8]
F-DI 9
F-DI 8
F-DI 7
F-DI 6
F-DI 5
F-DI 4
F-DI 3
F-DI 2
F-DI 1
F-DI 0
TM54F_XX TM54F_XXMM/CU
p10000 (12.00 ms) r9780 (4.00 ms)
STO active in drive
r9773.1
SS1 active in the drive
r9773.6
Statically active
STO selected in drive
r9773.0
SS1 selected in the drive
r9773.5
Distribution of
drive groups
1  4
to drives 1  6
DRIVE-
CLiQ
[2804.8]
DRIVE-
CLiQ
Data encryption/decryption
Monitoring of
Basic
Functions
Grouping drives
1  6
to drive groups
1  4
Assignment of drive groupsF-DI assignment of drive groups
Put all
outputs to 0
r10054 SI Failsafe-event
Basic Functions
Drive group 4
Data encryption/decryption
SS1_active
Power_removed
Internal event
Data encryption/decryption
Drive group 3
SS1_active
Power_removed
Internal event
Drive group 2
SS1_active
Power_removed
Internal event
Drive group 1
SS1_active
Power_removed
Internal event
[2901.1]
[2902.1]
[2804.8] [2804.8]
[2804.8]
SI ackn int event
p10006(0)
SI STO DI
p10022[0...3]
SI SS1 DI
p10023[0...3]