Siemens G130 - Fig. 3-183 8145 - Recorder sequence control (r0108.5 = 1)

3 Function diagrams 3.20 Diagnostics
SINAMICS G130/G150
1304 List Manual (LH2), 07/2016, A5E03263479A
Fig. 3-183 8145 – Recorder sequence control (r0108.5 = 1)
- 8145 -
Function diagram
87654321
fp_8145_54_eng.vsd
DO: A_INF, B_INF, R_INF, S_INF, SERVO, VECTOR
S120/S150/G130/G150
10.09.15 V04.08.00
Diagnostics - Recorder sequence control (r0108.5 = 1)
4 ms
T0
1 s
<1> Directory on memory card: /INSTALL/SINAMICS/TRACE.
30: Prepare data save operation
r6997 = 30, r6992.11/12 = 0, r6992.13 = 1
Data buffering stopped
From 10, 20, 30
T0
20: Post trigger time running
r6997 = 20, r6992.11/12 = 1
Data buffering is active
10: Active
r6997 = 10, r6992.11 = 1
Data buffering is active
&
0: Not active
r6997 = 0, r6992.11 = 0
Data buffering disabled
Rec par
Enable
p6999[0] (1)
Enable act
&
Rec par
Enable
p6999[0] (1)
&
Trigger group sig
r6992.15[8144.4]
[8144.6]
t_posttrig
40: Start data save
r6997 = 40, r6992.11 = 0, r6992.13 = 1
Data buffering stopped
50: End data save
r6997 = 50, r6992.11/13 = 0
Data buffering stopped
&
Data saving
on memory card finished
60: Configuration
r6997 = 60, r6992.11 = 0
Data buffering disabled, data buffer deleted
&
From 0, 10
&
Start Configuration
Configuration finished
[8144.6]
0
&
<1>