4 Faults and alarms
4.2 List of faults and alarms
SINAMICS G130/G150
1914 List Manual (LH2), 07/2016, A5E03263479A
F36804 (N, A) Hub: Checksum error
Message value: %1
Message class: Hardware/software error (1)
Drive object: B_INF, HUB, VECTOR_G
Component: Terminal Board (TB) Propagation: LOCAL
Reaction: NONE
Acknowledge: IMMEDIATELY (POWER ON)
Cause: A checksum error has occurred when reading out the program memory on the DRIVE-CLiQ Hub Module.
Fault value (r0949, interpret hexadecimal):
Difference between the checksum at POWER ON and the actual checksum.
Remedy: - check whether the permissible ambient temperature for the component is maintained.
- replace the DRIVE-CLiQ Hub Module.
Reaction upon N: NONE
Acknowl. upon N: NONE
Reaction upon A: NONE
Acknowl. upon A: NONE
F36805 (N, A) Hub: EEPROM checksum incorrect
Message value: %1
Message class: Hardware/software error (1)
Drive object: B_INF, HUB, VECTOR_G
Component: Terminal Board (TB) Propagation: LOCAL
Reaction: NONE
Acknowledge: IMMEDIATELY (POWER ON)
Cause: The internal parameter data on the DRIVE-CLiQ Hub Module is incorrect.
Alarm value (r2124, interpret hexadecimal):
01: EEPROM access error.
02: Too many blocks in the EEPROM.
Remedy: - check whether the permissible ambient temperature for the component is maintained.
- replace the DRIVE-CLiQ Hub Module.
Reaction upon N: NONE
Acknowl. upon N: NONE
Reaction upon A: NONE
Acknowl. upon A: NONE
F36820 Hub DRIVE-CLiQ: Telegram error
Message value: Component number: %1, fault cause: %2
Message class: Internal (DRIVE-CLiQ) communication error (12)
Drive object: B_INF, HUB, VECTOR_G
Component: Terminal Board (TB) Propagation: LOCAL
Reaction: NONE
Acknowledge: IMMEDIATELY
Cause: A DRIVE-CLiQ communications error has occurred from the Control Unit to the DRIVE-CLiQ Hub Module involved.
Fault cause:
1 (= 01 hex):
Checksum error (CRC error).
2 (= 02 hex):
Telegram is shorter than specified in the length byte or in the receive list.
3 (= 03 hex):
Telegram is longer than specified in the length byte or in the receive list.
4 (= 04 hex):
The length of the receive telegram does not match the receive list.
To Next Page
Loading...
