Siemens G130 - r0723.0...21 CO;BO: CU digital inputs status inverted; CU DI status inv

To Next Page

To Previous Page

SINAMICS G130/G150

List Manual (LH2), 07/2016, A5E03263479A

255

2 Parameters

2.2 List of parameters

Dependency: Refer to: r0723

Notice: Regarding the terminal designation:

The first designation is valid for CU320, the second for CU310.

Note: DI: Digital Input

DI/DO: Bidirectional Digital Input/Output

Description: Display and BICO output for the inverted status of the digital inputs.

Dependency: Refer to: r0722

Notice: Regarding the terminal designation:

The first designation is valid for CU320, the second for CU310.

Note: DI: Digital Input

DI/DO: Bidirectional Digital Input/Output

10 DI/DO 10 (X122.12/X121.10) High Low -

11 DI/DO 11 (X122.13/X121.11) High Low -

12 DI/DO 12 (X132.9/X131.1) High Low -

13 DI/DO 13 (X132.10/X131.2) High Low -

14 DI/DO 14 (X132.12/X131.4) High Low -

15 DI/DO 15 (X132.13/X131.5) High Low -

16 DI 16 (X122.5/X120.3) High Low -

17 DI 17 (X122.6/X120.4) High Low -

20 DI 20 (X132.5/X120.9) High Low -

21 DI 21 (X132.6/X120.10) High Low -

r0723.0...21 CO/BO: CU digital inputs status inverted / CU DI status inv

CU_G130_PN,

CU_G150_PN,

CU_G130_DP,

CU_G150_DP

Can be changed: - Calculated: - Access level: 1

Data type: Unsigned32 Dyn. index: - Func. diagram: 2119, 2120,

2121, 2130, 2131, 2132, 2133

P-Group: Commands Unit group: - Unit selection: -

Not for motor type: - Scaling: - Expert list: 1

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 DI 0 (X122.1/X121.1) High Low -

01 DI 1 (X122.2/X121.2) High Low -

02 DI 2 (X122.3/X121.3) High Low -

03 DI 3 (X122.4/X121.4) High Low -

04 DI 4 (X132.1 / -) High Low -

05 DI 5 (X132.2 / -) High Low -

06 DI 6 (X132.3 / -) High Low -

07 DI 7 (X132.4 / -) High Low -

08 DI/DO 8 (X122.9/X121.7) High Low -

09 DI/DO 9 (X122.10/X121.8) High Low -