Siemens G130 - r4952 TEC DO-specific GUID total length; TEC DO GUID length; r4955[0...n] TEC DO-specific identifier; TEC DO ident; p4956[0...n] TEC DO-specific activation; TEC DO act

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
730 List Manual (LH2), 07/2016, A5E03263479A
Note: The identifier of a Technology Extension comprises a maximum of 8 characters plus separator.
TEC: Technology Extension
Description: Displays the total length of the GUIDs of the Technology Extensions installed on this drive object.
Dependency: Refer to: r4950, r4951, r4955, p4956, r4957, r4958, r4959, r4960
Note: The GUID of a Technology Extension comprises 16 characters plus 1 character major information plus 1 character,
minor information.
GUID: Globally Unique IDentifier
TEC: Technology Extension
Description: Displays the identifier of the Technology Extensions installed on this drive object.
r4955[0...8]: Identifier of Technology Extension 1
r4955[9...17]: Identifier of Technology Extension 2, ...
Dependency: Refer to: r4950, r4951, r4952, p4956, r4957, r4958, r4959, r4960
Notice: If there is no Technology Extension, then it is not possible to access an index.
Note: TEC: Technology Extension
Description: Setting to activate the Technology Extensions installed on this drive object.
r4956[0]: Activation of Technology Extension 1
r4956[1]: Activation of Technology Extension 2, ...
Value: 0: Technology Extension inactive
1: Technology Extension active
Dependency: Refer to: r4950, r4951, r4952, r4955, r4957, r4958, r4959, r4960
Notice: If there is no Technology Extension, then it is not possible to access an index.
Note: TEC: Technology Extension
r4952 TEC DO-specific GUID total length / TEC DO GUID length
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned16 Dyn. index: - Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 288 -
r4955[0...n] TEC DO-specific identifier / TEC DO ident
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned8 Dyn. index: r4951 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
p4956[0...n] TEC DO-specific activation / TEC DO act
All objects Can be changed: C1, T Calculated: - Access level: 4
Data type: Integer16 Dyn. index: r4950 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 1 0