121
Connecting/using other devices
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / HS_and_other_Devices.fm / 31.08.10
Version 4, 16.09.2005
Changing the Bluetooth name of
the base
You can change the base name used to iden-
tify it on the display of another Bluetooth
device.
v
¢ ò Bluetooth ¢Own Device
The device name and address for the base
are displayed.
§Change§ Press the display key. Bluetooth
is activated, if necessary.
~ Change the name.
§Save§ Press the display key.
Using a Bluetooth headset
Setting the Headset function key
If you want to make calls on your base via a
headset, you must first assign a function key
on the base to the Headset function
(
¢ page 125).
Accepting/transferring calls on the
headset
Prerequisite: Bluetooth is activated; a con-
nection has been established between the
Bluetooth headset and the base
(
¢ page 117).
u You are talking on the base or
u You are trying to connect to another
party or
u A call is being signalled on the base
¤ Press the Headset function key on the
base to accept the call on the headset.
Calling
¤ Enter the phone number on the base and
press the Headset function key on the
base.
Using data devices
Prerequisite: Bluetooth is activated.
The data device is in the list of known
devices (marked with õ,
¢ page 118)
or temporarily connected to the base
(
¢ page 120).
You can establish a Bluetooth connection to
the base using a PC, PDA or even a mobile (as
a data device).
You can then, for example, exchange direc-
tory entries with the data device in the form
of vCards, compare the PC's directory with
the directory on the base, load ringer set-
tings or screensavers from the data device to
the base's resource directory or use AT com-
mands to make outgoing calls and accept
incoming calls.
The phone is supplied with QuickSync soft-
ware for the PC (
¢ page 156). You will find
it on the enclosed CD.
QuickSync provides PC functions via a
graphical interface.
Please note
u If you only accept the registration of a
headset on a temporary basis, the
headset is not deleted from the
known devices list.
u If the list of known devices already
contains five data devices/mobiles,
you will be asked to delete a device
from the list first (
¢ page 118).
Please note
u You can operate headsets on your
handset that have the headset or
handsfree profile. If both profiles are
available, the handsfree profile is used
to communicate.
u Calls can only be initiated from the
base.
Recommendation
If your headset has a push-to-talk key, we
recommend that you use the Headset
function key for transfer/pickup as well.
Please note
For instructions on adjusting the speak-
ing volume on your headset,
¢ page 128.
To Next Page
Loading...
