Siemens Gigaset SE361 WLAN - Back Panel

18
First Steps
Gigaset SE361 WLAN / englisch / A31008-M1067-R101-1-7619 / device.fm / 30.10.2006
Schablone 2004_12_27
Back panel
The back panel of the Gigaset SE361 WLAN offers the following ports and controls:
WLAN
On The radio interface is activated, no data transmission at
present.
Flashing The Gigaset SE361 WLAN is sending or receiving data on
the radio interface.
Off The radio interface is deactivated.
LAN1 –
LAN4
On A device is connected to the relevant LAN port.
Flashing The LAN port is sending or receiving data (traffic).
Off There is no device connected.
Element Description
12V 0,5A DC Socket for the mains adapter that comes with the device.
Warning: Using the wrong power supply unit may damage the
Gigaset SE361 WLAN.
WAN Socket for connecting to the DSL modem.
LAN4 – LAN1 Four 10/100 Mbps switch ports with automatic recognition (RJ45).
You can connect up to four Ethernet devices (such as PCs, a Hub or
Switch).
LED State Status