22
First Steps
Gigaset SE361 WLAN / englisch / A31008-M1067-R101-1-7619 / device.fm / 30.10.2006
Schablone 2004_12_27
Wired
ì Connect one of the yellow LAN sockets (LAN1 – LAN4) at the rear of the Gigaset
SE361 WLAN to the Ethernet connection on a PC. To do this, use an Ethernet cable
with RJ45 jacks (CAT5). You can also use the yellow Ethernet cable supplied with the
device.
The four LAN sockets can automatically set the transmission speed to 10 Mbps Eth-
ernet or 100 Mbps Fast Ethernet, and the transmission mode to Half duplex or Full
duplex depending on the performance of the network adapter in your PC.
To Next Page
Loading...
