23
First Steps
Gigaset SE361 WLAN / englisch / A31008-M1067-R101-1-7619 / device.fm / 30.10.2006
Schablone 2004_12_27
Connecting to the mains power supply
ì Connect the mains adapter cable to the 12V 0,5A DC socket on the Gigaset SE361
WLAN.
ì Plug the mains adapter into a mains socket.
Your Gigaset SE361 WLAN is now ready for use:
u The power LED on the front lights up.
u The WLAN LED lights up to indicate that the Gigaset SE361 WLAN is ready to open
wireless connections.
The radio link to a PC that is connected by means of a wireless network adapter is
established automatically if the network adapter has been configured with the same
SSID as the Gigaset SE361 WLAN (see page 21). It can take a few seconds for the
wireless connection to be established. The WLAN LED flashes when data is sent or
received via this connection.
u The LAN LEDs light up if a device is connected to the respective LAN port by means
of an Ethernet cable.
In order to communicate via the Gigaset SE361 WLAN, the network must be configured
on the connected PCs. This usually takes place automatically (see page 76).
Note:
Only use the mains adapter (12V 0.5A DC) that is supplied with the device.
To Next Page
Loading...
