32
Security Setup Wizard
Gigaset SE361 WLAN / deutsch / A31008-M1067-R101-1-7619 / configure_router.fm / 07.09.2006
Schablone 2004_12_27
Security Setup Wizard
The Security Setup Wizard offers you additional settings that will improve your net-
work security. You can
u assign a Password for configuring the Gigaset SE361 WLAN (see page 32),
u change the ID for your wireless network (SSID) (see page 33),
u set Encryption for wireless traffic (see page 34),
u limit access to your wireless network to certain PCs (see page 38).
The Gigaset SE361 WLAN's user interface will guide you through the security configu-
ration step by step. Once you have completed a screen, click on Next >. If you want to
make any changes or check your entries, click < Back.
ì Select Security Setup Wizard on the start screen or in the tab to start the security
configuration if you did not go straight to the start screen for the security settings
after making the basic settings.
ì Click on Next > to proceed to the next step.
Assigning a Password
In the first step of the setup wizard you can assign a Password for the user interface. On
delivery, the configuration of your Gigaset SE361 WLAN is protected with the admin
Password. To prevent unauthorised changes to the configuration, you should set your
own Password and change this Password from time to time.
ì Enter the default password (or the new password you have assigned) in the Current
password field.
ì Enter a new password in the New password field, and repeat it in the Confirm new
password field.
The Password can be up to 32 alphanumerical characters long. The password is case
sensitive. Avoid proper names and all too obvious words. Use a combination of let-
ters and numbers.
To Next Page
Loading...
