35
Security Setup Wizard
Gigaset SE361 WLAN / deutsch / A31008-M1067-R101-1-7619 / configure_router.fm / 07.09.2006
Schablone 2004_12_27
ì Enter a key of your choice in the Pre-shared key field (min. 8 to max. 63 characters)
and confirm it by repeating the entry.
ì To go to the next step, click on Next >.
WEP encryption
WEP (Wired Equivalent Privacy) is an encryption procedure for radio signals in wireless
networks and complies with the IEEE 802.11 standard.
If you transmit data wirelessly and not all components in your wireless network support
the higher security standard WPA (see page 34), we recommend that you activate WEP
Encryption on these network components.
You can choose either the standard 64-bit keys or the more robust 128-bit keys for
encryption. The keys are generated in hexadecimal or in ASCII format. You must use the
same keys for encryption and decryption for the Gigaset SE361 WLAN and all your wire-
less networkadapters.
Note:
u It is very important that you make a note of the Pre-shared key. You will need
this information to configure the wireless network adapters correctly.
u When you have completed the Security Setup Wizard you must also change
the encryption data on the wireless network adapters in the connected PCs
since, without the change, they will not be able to access the Gigaset SE361
WLAN's wireless network.
To Next Page
Loading...
