38
Security Setup Wizard
Gigaset SE361 WLAN / deutsch / A31008-M1067-R101-1-7619 / configure_router.fm / 07.09.2006
Schablone 2004_12_27
Access control within the wireless network
In this step you can specify which PCs will have wireless access to the Gigaset SE361
WLAN and hence to your LAN. Access control is based on the MAC addresss of the PCs'
network adapters. You can enter the MAC addresses for the PCs manually or select them
from the list of PCs that are currently logged in.
The default setting for access control is disabled. This means that all PCs that use the
correct SSID and the right encryption method can log in.
ì Next to MAC address filter select the option On to activate MAC filtering.
Entering MAC addresses manually
ì Enter the MAC address of the network adapter. You will normally find this address
on a label on the device.
ì Enter a name for the PC.
ì Click on Add to add the entry to the list.
Selecting from the list of known PCs
ì Select the required PC from the Known wireless clients list. All PCs that are cur-
rently logged in to the router with the correct SSID are displayed.
ì Click on Add to add the selected PC to the list.
To Next Page
Loading...
