61
Configuring the Advanced Settings
Gigaset SE361 WLAN / deutsch / A31008-M1067-R101-1-7619 / configure_router.fm / 07.09.2006
Schablone 2004_12_27
– With a 128-bit encryption depth the key is exactly 13 characters long.
Example of a valid key: GIGASET_SE361
ì Enter up to four keys in fields Key 1 to Key 4 and confirm these keys by entering
them again in fields
Confirm key 1 to Confirm key 4.
ì Select one of the four keys as Default key.
ì Click on OK to apply the settings.
Allowed clients
On this screen you can specify which PCs will have wireless access to the Gigaset SE361
WLAN and hence to your LAN.
ì In the Wireless Network menu, select Allowed Clients.
The default setting for access control is disabled. This means that all PCs that use the
correct SSID can log in.
Access control is based on the MAC address of the PCs' network adapters.
ì Activate access control via the On option in the field MAC address filter.
Entering PCs manually:
ì Enter the required PCs with MAC address and Device name in the appropriate
fields.
ì Click on Add to add the entry to the list.
Note:
u It is very important that you make a note of keys you enter or generate. You
will need this information to configure the wireless network adapters cor-
rectly.
u When you have completed configuration you must also change WEP encryp-
tion on the wireless network adapters for the connected PCs; if you do not,
they will no longer be able to access the Gigaset SE361 WLAN's wireless net-
work.
To Next Page
Loading...
