84
Configuring the local network
Gigaset SE361 WLAN / englisch / A31008-M1067-R101-1-7619 / configure_tcpip.fm / 30.10.2006
Schablone 2004_12_27
Network configuration with Windows 2000
To integrate a PC with Windows 2000 into a network that is configured with a Gigaset
SE361 WLAN, you must carry out the following steps:
1. Install the network services (see below).
2. Select a computer name and workgroup (see page 85).
3. Install the TCP/IP protocol (see page 86).
4. Make TCP/IP protocol settings (see page 88).
5. Deactivate the http proxy (see page 90).
6. Deactivate the popup blocker (only on Mozilla Firefox, see page 90)
7. Synchronise the TCP/IP settings with the Gigaset SE361 WLAN (see page 91).
Installing network services
You must install the network services so that the PCs in your network can access shared
resources. This is done as follows:
ì Click on Start – Settings – Control Panel.
ì Double-click on the Network and Dial-up Connections icon.
ì In the left-hand pane click on Add Network Components.
ì Now select Network Services and click on Next.
You will now be prompted to insert the Windows installation CD.
To Next Page
Loading...
