SE567/SE568 Series Residential Gateway User’s Guide Operating System Configuration
11
Checking TCP/IP Settings (Windows 9x/ME)
1. Select Start>Control Panel >Network. This displays the Configuration tab on the “Network”
window.
2. Select the TCP/IP protocol for your network card.
3. Click Properties. This displays the “TCP/IP Properties” window.
4. Click the IP Address tab.
5. Ensure that the Obtain an IP address automatically option is selected. This is the default Windows
settings.
6. Close this window.
7. Restart your computer to ensure it obtains an IP address from the Gateway.
8. Configure internet access using the procedure described in Internet Access Configuration.
To Next Page
Loading...
