en Cleaning and servicing
14
Basic setting Selection
After switch-on Main menu
Types of heating
1
Dishes
Night-time dimming Switched off
1
Switched on
Brand logo Display
1
Do not display
Fan run-on Recommended
1
Minimum
Telescopic rails Retrofitted
1
Not retrofitted
Sabbath mode Switched on
Switched off
1
Factory setting Reset
1
Factory setting (may vary according to model)
13.2 Changing the basic settings
1.
Press
.
2.
Press .
a The operating modes menu opens.
3.
Use the rotary selector to select the required operat-
ing mode "Settings".
4.
Press
to confirm.
a The first basic setting appears.
5.
Press
to switch between the different settings.
6.
Use the rotary selector to change the basic setting.
7.
Press .
a The display shows the changes "Save" or "Discard".
8.
Select the desired change using
or .
Note:Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
1.
Press
.
2.
Press to select "Discard".
a All your changes are discarded and not saved.
14 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
14.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶ Do not use harsh or abrasive cleaning products.
▶ Do not use cleaning products with a high alcohol
content.
▶ Do not use hard scouring pads or cleaning
sponges.
▶ Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶ Never use oven cleaner in the cooking compartment
when it is still warm.
▶ Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
▶ Wash new sponge cloths thoroughly before use.
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Follow the instructions on cleaning the appliance.
→"Cleaning the appliance", Page15
Appliance front
Surface Suitable cleaning agents Information
Stainless steel ¡ Hot soapy water
¡ Special stainless steel
cleaning products
suitable for hot sur-
faces
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Plastic or painted
surfaces
E.g. control panel
¡ Hot soapy water Do not use glass cleaner or a glass scraper.
To avoid permanent stains, remove any descaling agent that gets
onto the surface immediately.
To Next Page
Loading...
